7
*French Fries being fried a 2
nd
time will be lighter and crispier.
AFTER THE FOOD IS FRIED:
•
Make sure to turn the temperature control knob to the OFF position and unplug
the deep fryer.
•
Once food is done cooking, remove the lid, and hang the basket on the hook and
let excess oil drip into the oil pot.
Warning: Removing the lid will release hot steam. Take extreme care when handling.
Keep face and bare skin clear of the steam release.
•
Remove the basket and place the food on paper towels to absorb excess oil. Do
not touch the basket while it is still hot. Always use the handle.
•
Place the basket into the deep fryer.
•
Do not move the deep fryer until it is cooled entirely.
•
Unplug the power cord and place into storage if necessary.
CLEANING THE DEEP FRYER
1.
Remove the lid and basket.
WARNING: Before cleaning the deep fryer, make sure that it is disconnected from the
power outlet, make sure the unit and the oil has completely cooled. Oil retains its
temperature for a long period after use. Do not attempt to carry or move the deep
fryer while the oil is hot.
2.
Wait for the fryer to cool, lift out the Control Box Assembly & Heating element.
3.
Remove the oil pot and pour out the oil. It is recommended to filter the oil after each
use if you are to re-use the oil again.
4.
After removing the oil pot, the fryer can be divided into separate components to
clean.
5.
The oil pot and the main body can be immersed into water to clean.
6.
The Control Box & Heating Element should be wiped clean with absorbent paper
towels. Then use a damp cloth and a mild soap to clean.
WARNING: NEVER immerse the Control Box & Heating Element into water to clean.
7.
Dry all parts thoroughly.
Note: Do not use abrasive scrubbing brushes or chemical cleaners to clean the unit.
How to replace the filters:
Your carbon filter should be changed every 6 months. The oil filter should be changed
every 12 months.
1)
Unclip and remove the filter cover.
2)
Take out both white and black filter pieces.
3)
Throw out old filters and replace with new filters. Make sure the White filter
piece rests on the metal surface BELOW the carbon filter (black piece).
NOTE: Filters can be gently rinsed in warm soapy water as well and reused again. But it
will need to be replaced after considerable amount of usage.
