HOW TO USE YOUR DEEP FRYER (CONT.)
AFTER THE FOOD IS FRIED:_______________________
1.
Make sure to turn the temperature and timer control knobs to the
‘
OFF
’
position and unplug the deep fryer.
2.
Once food is done cooking, remove the lid, and hang the basket(s)
on the hook and let any excess oil drip into the oil pot.
Warning: Removing the lid will release hot steam. Take extreme
care when handling. Keep face and bare skin clear of any steam
release.
3.
Remove the basket(s) and place the food on paper towels to absorb
excess oil. Do not touch the basket(s) while still hot. Always use
the handle.
4.
Transfer food to a clean dish without the paper towels.
5.
Place the basket(s) into the deep fryer.
6.
If you are frying more than one batch, ensure the oil re-heats tothe
required temperature.
7.
When frying is complete, turn controls to OFF position.
8.
Disconnect the power cord. Allow the machine and the oil to cool
completely before attempting to move or clean.
PLASTIC LID:_________________________________
-
When your deep fryer reaches high temperatures and the plastic lid
is left on your deep fryer for a prolonged period of time, this may
result in slight warping of the shape of the lid.
-
Once the temperature has cooled down, the lid should reshape
itself back to its original form.
-
It is recommended to not leave the plastic lid on the deep fryer
during operation for any longer than 10-minutes at a time.
CARE AND CLEANING
1.
Remove the lid and baskets.
WARNING: Before cleaning the deep fryer, make sure that it is disconnected
from the power outlet, make sure the unit and the oil has completely cooled. Oil
retains its temperature for a long period after use. Do not attempt to carry or
move the deep fryer while the oil is hot.
2.
Wait for the fryer to cool, lift out the
Control Box Assembly & Heating element.
3.
Remove the oil pot and pour out the oil. It is
recommended to filter the oil after each use
if you are to re-use the oil again.
4.
After removing the oil pot, the fryer can be
divided into separate components to clean.
5.
The oil pot and the main body can be
immersed into water to clean.
6.
Note: Do not use abrasive scrubbing brushes
or chemical cleaners to clean the unit.
The Control Box & Heating Element should be wiped clean with
8
