NOTE: Remove workbowl from appliance before removing the chopping blade to prevent
food from leaking through the center opening of the workbowl.
Carefully remove the chopping blade.
Unplug appliance when not in use.
HELPFUL TIPS FOR CHOPPING
Watch carefully to avoid over-processing foods.
The PULSE position offers the best control.
For best results, process foods that are about the same size.
Do not overload the workbowl.
Never walk away from the processor while it is on.
You may use hot but not boiling liquids.
Do not process more 3 cups of liquid in the workbowl at any given time.
To process meat, use no more than 2 cups of ¾-inch cubes. Process using PULSE in 5-second
intervals.
Insert a funnel into the feed chute when adding ingredients such as oil, flour and sugar.
Cut food such as meat, bread, vegetables into cubes approximately 2cm before processing
Biscuits should be broken into pieces and added down the feed tube while the machine is
running.
When making pastry use fat straight from the fridge, cut into 2cm cubes. Take care not to
over-process.
The chopping blade is the most versatile of all the attachments. The length of the processing time
will determine the texture achieved. For coarser textures use the pulse control. Use the chopping
blade for cake and pastry making, chopping raw and cooked meat, vegetables, nuts, pate, dips,
pureeing soups and to also make crumbs from biscuits and bread. It can also be used for yeasted
dough mixes if the dough tool is not supplied. Use the dough tool for yeasted mixes.
HOW TO LOCK THE COVER
1.
Place cover over workbowl with the small latch to the left of the workbowl’s handle.
2.
Hold feed chute of workbowl cover and rotate cover counterclockwise until cover locks into
place.
IMPORTANT: For your protection this appliance has an interlock system. The processor will not
operate unless the processing workbowl and cover are properly locked in place.
Insert the food pusher into the feed chute.
NOTE: The food pusher is used to guide foods through the feed chute and can be removed
when adding liquid or additional foods while the processor is running.
www.maxi-matic.com
7
info@maxi-matic.com
