Page 8 of 12
8.
Wheel lock assembly (brakes)
These are used to hold the wheelchair in a stationary position, and are fitted on either side
of the wheelchair. They should not be used when the wheelchair is moving or to slow it
down. They should always be applied together.
To operate, push the brake lever forward towards the front of the wheelchair. This will
immobilize the wheelchair. To release the brake, move the lever towards the rear of the
wheelchair.
9.
Cross Bar
Operation of the cross brace permits the wheelchair to be opened and closed easily. It
should be inspected at regular intervals for signs of wear and bending.
10.
Folding Backrest Device
Push down the hinge to fold down the backrest. Automatically lock when pull up the
backrest handle. This device is to enhance the storage feature.
