background image

12

Note: The picture is for reference only. Any discrepancy in future, please adhere to the final product.

Note:  It is suggested storing the logger at room temperature before started. 

The temperature data logger is mainly used for monitoring and logging temperature in storage and shipment of food and pharmaceuticals, such as cooler 

boxes, refrigerated trucks, containers, etc.

The logger can connect to a computer via its USB port and export a PDF report. It features an internal sensor and a CR2450 lithium battery with whole 
protection grade up to IP67. A barcode is prepared for scanning.

All the parameters are preconfigured before the logger leaves the factory. Some can be customized based on your needs.

Memory capacity:

 

16000 points at maximum. Actual record capacity may be different due to different log cycles. 

Start delay: 

When the logger is started, it delays for a period of time to start logging. The delay time can be customized.

Alarm thresholds: 

Alarm zone can be set according to the alarm thresholds. The logger supports three upper limit and two lower limit.

Alarm delay: 

The logger does not alarm immediately when the temperature is within the alarm zone. It begins to alarm only when the alarm delay time elapses.

Single 

 Cumulative

The logger records the single time for continuous out-of-limit events
The data logger records the cumulative time of all the out-of-limit events 

Alarm type:

 

Press and hold the button for 5 seconds to 

start logging. Green LED will flash 5 times.

Peel off the barcode label for further use.

   

   

 

 

 

User Manual  

 RC-19 Single-Use Temperature Data Logger 

Overview

Illustration

Technical Parameters

Parameter Instructions

Operating Instructions

Back

 Front 

Temperature measuring range:

 -30

~70

  Resolution: 0.1

Alarm threshold: 

default (customizable)

Storage temperature:

 -30

~70

Data interface:

 USB2.0

Temperature accuracy: 

0.5

/0.9

(-20

~40

); 1

/1.8

(others)

Report type:

 PDF format

Sensor type: 

internal NTC

Battery: 

built-in CR2450 wide temperature lithium battery

Memory capacity: 

16000 points (MAX)

Battery life:

 2 years 

                     (stored and used under normal temperature environment)

Log cycle:

 6, 15, 30, 60, 90, 120, 180days (customizable)

Protection grade:

 IP67

Size:

 80mm (L) x 48mm (W) x 5.8mm (H)

Alarm type:

 single or cumulative

Weight:

 approx. 15g

S/N:EF216A100001

   

 

 

H3                 The range of value greater than H3 is the super high temperature alarm zone 3
H2                 The range of value greater than H2 is the super high temperature alarm zone 2
H1                 The range of value greater than H1 is the super high temperature alarm zone 1
L1                  The range of value less than L1 is the super low temperature alarm zone 1
L2                  The range of value less than L2 is the super low temperature alarm zone 2

Configuration Info

LED indicator 

Barcode label 

S/N:EF216A100001

Button(Start/Status/Mark/Stop)  

Waterproof plastic bag 

USB port 

Start/Stop Info

 Mark Info

 Status Request

Paste Area

Reviews: