ID 985/S/E/CK - ID985/E LX
14/14
ECHO • DIP SWITCHES
Dip1= OFF; Dip2= OFF
L00=0
The Echo displays what is displayed on the MASTER / Slave1...3 instrument • example 1 / 2
Dip1= ON; Dip2= OFF
L00=1
The Echo displays what is displayed on the Slave 1 instrument • example 1
Dip1= OFF; Dip2= ON
L00=2
The Echo displays what is displayed on the Slave 2 instrument • example 1
Dip1= ON; Dip2= ON
L00=3
The Echo displays what is displayed on the Slave 3 instrument • example 1
The Echo repeater has 2 DipSwitches(*) for configuring the
repeater for the remote display of what appears on the dis-
play ID985/S/E/CSK in a master-slave network, as indicated
below:
ID985/E MASTER
ID985/E SLAVE 1
ID985/E SLAVE 2
ID985/E SLAVE 3
ECHO MASTER
L00=0
ECHO SLAVE 1
L00=1
ECHO SLAVE 2
L00=2
ECHO SLAVE 3
L00=3
ECHO SLAVE 1
L00=0
ECHO SLAVE 2
L00=0
ECHO SLAVE 3
L00=0
code. 9IS23080
- GB -
rel. 4/08
© Eliwell Controls s.r.l. 2008 All rights reserved.
Eliwell Controls s.r.l.
Via dell’Industria, 15 • Zona Industriale Paludi • 32010 Pieve d’Alpago (BL) ITALY
Tel39 0437 986 111 • Fax +39 0437 989 066
Sales +39 0437 986 100 (Italy) • +39 0437 986 200 (other countries) • E-mail saleseliwell@invensyscontrols.com
Technical he39 0437 986 300 • E-mail techsuppeliwell@invensyscontrols.com
www.eliwell.it
Example 1
Each ECHO slave
repeats the corre-
sponding ID985/E
slave
Example 2
All the ECHO
slaves repeat the
ID985/E master
display
To set the DipSwitches(*), remove the instrument backplate using a
screwdriver or something similar.
After making the configuration setting, close the backplate simply
by pressing with the finger, aided by the side tabs. There is a
groove for the wire on the bottom left of the backplate.
(*) Contact the Sales Office for further information on feasibility and part
number availability.
