M1 Cross Platform Controllers - User Guide
Page 11
Disarming and Resetting the System
After entering the premises through one of the assigned Entry delayed zones,
the keypad will sound a continuous entry delay tone. The keypad will display
a count-up of the programmed entry delay time. Refer to the System Notes
for the amount of entry time available.
Disarming
1.
Proceed directly to the keypad.
2.
Enter a valid user code.
3.
The entry delay tone should stop.
4.
When the
Armed
light turns off the alarm system is disarmed.
If a valid user code is not entered before the entry delay time expires, an
alarm will occur. If this should occur proceed as follows:
Disarming and Silencing After an Alarm
1.
Proceed directly to the keypad.
2.
The display will show the alarm type and first zone that tripped.
3.
Enter your user code.
4.
The entry delay tone should stop.
5.
When the
Armed
light turns off the alarm system is disarmed.
After an alarm has been silenced by a valid user code, the display
will continue to show the alarm type and zone until a valid user code
is entered a second time. This “Acknowledgment” is designed so
that the user sees what caused the alarm after things are quieted.
Disarming and Silencing During an Alarm
1.
Proceed directly to the keypad.
2.
The keypad display will show the type of alarm.
3.
Enter a user code.
4.
The keypad entry tone and the alarm siren/bell will stop.
5.
When the
Armed
light turns off the alarm system is disarmed.
6. If you are certain the alarm was accidental, contact the Central
Monitoring Center to avoid a false dispatch of the authorities.
