M1 Cross Platform Controllers - User Guide
Page 23
Fire Safety & Maintenance
If the fire alarm activates, the siren or bell will pulse ON and OFF and the
display will show “Fire Alarm”. Always follow your evacuation plan and leave
the building immediately, even if the a fire condition is not apparent. If your
system is connected to a central monitoring station, an emergency report
could be sent to that center. If you discover the fire alarm was in error, notify
the central monitoring station to avoid an unnecessary response. If the fire
alarm sounds at night or you have any doubt about whether the alarm is real,
the safest response is to evacuate the building.
Silencing a Fire Alarm
To silence the alarm, enter a valid user code. The display continues to show
“Fire Alarm” until you enter your user code again to acknowledge the alarm.
Resetting Smoke Detectors
Refer to Menu 2, page 16 for instructions on resetting Smoke Detectors.
Acknowledge/Reset an Alarm
After a fire alarm is silenced the display will continue to show “Fire Alarm” until
the detectors are reset and the alarm has been acknowledged by entering of
your user code a second time.
Household Fire Safety Audit
To reduce the risk of fire, it is recommended that a household fire safety audit
be conducted and a fire escape plan developed.
- Are all electrical outlets and appliances in a safe and working condition?
- Avoid overloading lighting and outlet circuits and inspect all cords periodi-
cally for damage or frayed conditions. Seek professional electricians
assistance if you suspect any weaknesses or discover any conditions you
deem unsafe.
- Are all flammable liquids stored safely in well ventilated cool areas and in
proper safety containers? Avoid cleaning with flammable liquids.
- Are lighters, matches, and hazardous materials stored properly and out of
reach of children?
- Are fireplaces and furnaces in good working order? Seek professional
assistance and have these devices serviced and cleaned periodically.
