M1 Cross Platform Controllers - User Guide
Page 8
Arming in the “Away” Mode
Away mode arming is the highest arm level, intended for use when the
premises is unoccupied. Both perimeter and interior zones will be armed.
The
Ready
light must be on or flashing for the alarm system to be armed.
Secure all protected doors and windows.
1.
Enter a User code.
2.
The Armed and Exit lights will illuminate and the exit tone will start.
4.
Leave the premises during the exit delay.
5.
At the end of the exit delay the alarm system will be armed Away.
During the last 10 seconds of the exit delay time the exit tone will beat faster
to warn you that the time is about to expire. If you feel that you will be unable
to get out and close the exit door in time we recommend that you return to the
keypad, disarm, and rearm.
Arming in the “Vacation” Mode
Vacation mode is a second level of Away mode. It can be used to activate
energy saving automation features when the building will not be occupied for
an extended period of time. After arming, pressing the Exit button at any time
during the exit delay time to change the armed mode to vacation.
Arming in the “Stay” Mode
Stay mode arming is intended for use when the premises is occupied. All
perimeter doors and windows are armed, and all interior zones are excluded.
Secure all protected doors and windows.
1.
Enter a User code.
2.
The Armed and Exit lights will illuminate and the exit tone will start.
3.
Press the Stay key. The key will light up. All interior zones will be
excluded and the exit tone will be silenced. Delayed entry/exit zones
will still be delayed.
4.
(Option, may not be enabled) Additional presses of the Stay key
may allow scrolling to different modes of Stay arming if enabled by
your installer. Additional modes are Stay Instant, Stay Night, and
Stay Night Instant.
