M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 7
Display “Show” F Keys
Pressing this button will swap the display to the extended Main screen. All 6
of the “F” keys are available on this screen.
BYPASS - Excluding Zone(s)
Bypass permits zones to be excluded (ignored) by the control during the
current armed period. Bypassed zones cannot trip an alarm. Bypasses on
zones are automatically canceled when the control is disarmed.
1.
Press the
Bypass
key PLUS the number of the zone to be bypassed.
2.
Press the
Bypass
key again.
3.
The display will indicate whenever one or more zones are bypassed.
Note: Only zones programmed as bypassable may be bypassed.
Bypassing may also require entry of a user code.
CHIME - Annunciating Zone Activations
Chime produces an audible alert when selected doors, windows, or other
zones are opened (violated). This is ideal for annunciating when someone
enters or leaves the premises through a normal doorway, but it may also be
used to annunciate abnormal access to restricted areas.
There are 4 selections or levels of Chime: Tone, Voice, Tone/Voice, and Off.
1.
Press the Chime key one time to select the Chime Tone mode.
2
. Press again within ~30 seconds to select Chime Voice mode.
3.
Press again within ~30 seconds to select Chime Tone/Voice mode.
4.
Pressing again within ~30 seconds will turn Chime mode Off.
Note: Only the installer has the ability to program which doors, windows,
etc. (zones) will be included in the Chime mode.
Disarming and Resetting the System
When you enter the premises through one of the Entry delayed zones the
system should sound a continuous entry delay tone and display a count
down of the entry delay time.
1.
Proceed directly to the keypad and enter a valid user code.
2.
The entry delay tone should stop and the system will be disarmed.
