Safety
6
2 Safety
2.1
General notes of safety
The valid regulations and srandards, like DIN EN 13241-1, DIN EN 12445, DIN EN 12453 etc., have to
be observed during installation.
Do not put a damaged gate opener into operation.
After set-up (installation) every user of the equipment has to be instructed about the operation and
function of the swing gate opener. Only the use of spare parts made by the original manufacturer is
allowed.
2.2
Notes on safety for the operation
Children and not instructed persons are not allowed to operate the gate system.
No persons, objects, or animals are allowed within the range of the gate movement during opening or
closing. Never reach into moving parts of the gate opener or the gate itself. Drive or walk through the
gate system only after complete opening.
The gate system has to be secured depending on the type of usage, corresponding to the valid
standards and regulations (e.g. safety at the main and secondary closing edges).
The safety devices have to be checked regularly for functioning according to the standards and
regulations, at least once a year.
2.3
Notes on safety for the operation with radio remote control
The radio remote control should only be used, if the area of movement of the gate is always
completely visible by the operator and thus it is assured, that no person, object, or animal is present
within this range of movement.
The radio remote control transmitters have to be carefully kept, so that an unintentional use is
impossible.
Radio remote controls should not be operated at radio-technical sensitive locations, like airports or
hospitals. Interferences by other (properly operated) radio installations, which are used within the
same frequency range, cannot be ruled out.
2.4 Intended
usage
The operating safety is only guaranteed with the intended use of the gate opener.
The swing gate openers of the series ZENIT-S 300 / ZENIT-S 450 after installation serve the opening
and closing of not wind-resisting, horizontally moving gates with a max. weight of 300kg or 450kg per
wing and a max. wing length of 3,000mm or 4,500mm respectively.
The controller MO 36 is a component part and controls the swing gate opener ZENIT.
Any usage beyond this and/or any different application of the equipment is prohibited and is
considered as not according to regulations.
