”DWN”
Each time being pressed, this button shifts 1 channel
down (of 0,1 MHz) from the main frequency selected.
10 steps are available moving 1 MHz down in total.
When pressed more than 10 times no action is caused
and an indication of this is shown by flashing 2 times
the LED.
”UP”
Each time being pressed, this button shifts 1 channel
up (of 0,1 MHz) from the main frequency selected. 10
steps are available moving 1 MHz up in total.
When pressed more than 10 times no action is cau-
sed and an indication of this is shown by flashing 2
times the LED.
The factory set radio channel at the first power up is
90,0 MHz.
The PC0101 will always memorise the radio channel
programmed while powered off, and will continue to
send out the latest programmed channel when powered
up again.
All stereo Hi Fi receivers connected to the system
can now receive the stereo signal from i.e. the home
PC, once these are tuned in to the radio channel of the
PC0101.
Adjustments
No adjustments of the PC0101 are necessary.
However, if the sound is significantly distorted it may be
caused be oversteering of the PC0101 input. This
should be adjusted from the volume control of the PC
connected (or other audio equipment).
89.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 90.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 91.0
MHz
DWN
10 x push = 89.0 MHz
Power Supply
12 VDC (external)
Current 70
mA max
Audio Bandwidth
30 Hz – 18 kHz
Input Levels
775 mV rms / (0 dBm)
Input Impedance
47 kOhm
Output Level
75 dBuV
Output Impedance
100 Ohm
Frequency Band
89 – 106 MHz
Pre-emphasis 50
uSec
Distortion 0,4
%
Signal – Noise Ratio
66 dB
Channel Separation
28 dB
Shielding
> 55 dB
Size (WxDxH)
169x84x49 mm
Weight 0,65
kg
EMC Standards
EN 55020
89/336/EEC
Technical Specifications
ELKO A/S, P. O.Box 234, N-1301 Sandvika, Tel: +47- 67 80 73 00 Fax: +47- 67 80 73 01
AB Elektrokontakt, Box 2093, 128 22 Skarpnäck, Tel. 08-447 33 70, Fax. 08-447 33 80
ELKO SUOMI OY, Olarinluoma 16 02200 ESPOO Tel +358 09 439 3210 Fax +358 09 4393 2120
