GDE12279-02
11/2020
4
EKO07235
en
R
R
R
R
R
Max. 34 mm
60 mm
R
R
GN
D
R
I
H
1 × 5 s to 15 s
1 × >15 s
JKL
M
N
O
R
R
R
G
E
B
C
D
F
R
A
en
ELKO SmartHUB
Prerequisites
Download the
ELKO Smart app
to your smartphone /
tablet, to configure and control ELKO Smart devices.
Additional system information
Detailed product information is available
online in the
system
user guide
: Scan the
QR code or follow the link.
For your safety
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH
Safe electrical installation must be carried out
only by skilled professionals. Skilled professionals
must prove profound knowledge in the following
areas:
•
Connecting to installation networks
•
Connecting several electrical devices
•
Laying electric cables
•
Safety standards, local wiring rules and regulations
Failure to follow these instructions will result in
death or serious injury
Getting to know the product
The ELKO SmartHUB (the
device
) is a
communication
interface that can connect to all your ELKO Zigbee
devices, enabling you to easily manage your home
environment.
Functions
•
Monitors and controls ELKO Zigbee devices through
the mobile app, Ethernet or Wi-Fi
®
.
• Create
Moments
or
Automations
to operate ELKO
Zigbee devices through the mobile app.
Package contents
A
ELKO SmartHUB
B
Metal bracket
C
Screws: 2 × ST4.2 × 25 mm with wall plug
D
AC adaptor
E
2-pin plug
F
AC adaptor USB cable
G
Installation instructions
The ethernet cable is not included in the package.
It must be procured by the user.
Mounting the device
Installing the AC adaptor
DANGER
RISK OF ELECTRIC SHOCK, EXPLOSION OR
ARC FLASH
Make sure that the 2-pin plug is inserted in the correct
position and rotated clockwise 90º until the plug firmly
locks onto the AC adaptor with a 'click' sound.
Failure to follow these instructions will result in
death or serious injury.
Choosing the installation location
The device can be installed on:
•
Wall box
•
U
se a standard wall box for the installation.
•
Use a right angle ethernet cable when
installing the device on a wall box.
•
The ethernet cable and power cable must be
pre-wired in the wall box.
•
The metal bracket must not be fixed with
claws or nails. It should be mounted on the
wall box using screws to prevent the device
from falling.
•
Wall
• Table
Use the table stand for SmartHUB EKO09742 when
mounting the device on a table.
Connecting the device
Use either the supplied AC adaptor or 12 VDC
external power supply to power on the device.
DANGER
RISK OF ELECTRIC SHOCK, EXPLOSION OR
ARC FLASH
Make sure that the 12 VDC power supply is turned off
before making connections to the device.
Failure to follow these instructions will result in
death or serious injury.
Recommended power supply for different mounting
options:
Device mounted on the wall box:
Use a 12 VDC
external power supply.
Device mounted directly on the wall:
Use the supplied
AC adaptor.
Device installed on a table using tablestand:
Use the
supplied AC adaptor.
NOTICE
EQUIPMENT DAMAGE
•
If the device is powered on through the micro USB
port, use the provided AC adaptor only.
•
If the device is powered on through the terminals,
use a suitable 12 VDC power supply only.
Failure to follow these instructions can result in
equipment damage.
|
|
Operating elements
H
Reset button
I
Power button
J
Ethernet LED
K
Wi-Fi
®
LED
L
Zigbee LED
M
Ethernet port
N
Terminals for power supply (12 VDC)
O
Micro USB port for the AC adaptor
Resetting the device
The device supports Ethernet and Wi-Fi
®
connections.
Resetting the Ethernet and Wi-Fi
®
settings
Resetting the device
FD
Upon successful reset, all configuration data, user data,
and network data are deleted.
Operating the device
Prerequisites
The
device must be properly installed and powered on.
Configuring the device
The device can be configured through the ELKO Smart
app.
For detailed configuration procedures, refer to
the system user guide
.
Behaviour of the LEDs
Refer to the system user guide.
Troubleshooting
Refer to the system user guide.
Technical data
AC power adaptor
Model number: CPS008050100*
Input: 100-240 VAC, 50/60 Hz
Output: 5.0 VDC, 1.0 A, 5.0 W
Average active efficiency:
73.7% @115 VAC, 230 VAC
No-load power consumption:
0.08 W @115 VAC, 230 VAC
Power supply
5 VDC/1.0 A AC power adaptor
through micro USB port
12 VDC/0.5 A power supply
through 2-pin terminals (not
included in the package)
Connector type
Micro USB port for the AC
adaptor
2-pin terminals
Cable type:
0.25 mm
2
to 1.50 mm
2
Communication
interface
Ethernet: IEEE802.3,
10/100 base-T (LAN)
Wi-Fi
®
: 2.4 GHz,
IEEE802.11 b/g/n compliant
Zigbee: 2.4 GHz,
IEEE802.15.4 compliant
Operating
frequency
2405 - 2480 MHz (Zigbee)
2412 - 2472 MHz (Wi-Fi
®
)
Max. radio
frequency power
transmitted
<10 mW (Zigbee)
<67 mW (Wi-Fi
®
)
System clock
RTC function with coin battery
(CR1220)
IP rating
IP20
Operating
temperature
0 °C to 40 °C, indoor use only
Relative humidity
10% to 90%, non-condensing
Product
dimensions
(H × W × D)
86 × 86 × 34 mm
Certification
Zigbee 3.0
Dispose of the device separately from
household waste at an official collection point.
Professional recycling protects people and the
environment against potential negative effects.
Trademarks
•
Zigbee
®
is a registered trademark of the Zigbee
Alliance.
• Apple
®
and App Store
®
are brand names or registered
trademarks of Apple Inc.
•
Google Play™ Store and Android™ are brand names
or registered trademarks of Google Inc.
•
Wi-Fi
®
is registered trademark of Wi-Fi Alliance®.
Other brands and registered trademarks are properties
of their relevant owners.
EU Declaration of conformity
Hereby, ELKO, declares that this product is in
compliance with the essential requirements and other
relevant provisions of RADIO EQUIPMENT DIRECTIVE
2014/53/EU. Declaration of conformity can be
downloaded on: ELKO.no.
ELKO
ELKO AS
Sandstuveien 68, 0680 Oslo
Pb. 6598 Etterstad, 0607 Oslo
Phone: +47 67 80 73 00, E-mail: ccc@elko.no
www.elko.no
|
fi
off.elko.no/elko-smart
2
1
3
Click!
