TOUCHSTONE Surface Heater Control System
Installation Instructions
Operating Instructions
Surface Heaters
It is recommended to turn the Surface Heater ON 5-10 minutes prior to
entering the tub. Once the Heater Button is pressed the red LED
indicator will illuminate and start a 30-minute timer. The Heater will
begin to warm the surface of the seat and/or back wall. The
temperature will increase to a comfortable level within a 5-10 minute
period. To turn off the Surface Heater earlier press the Surface Heater
button.
Optional Multi-color Tub Light
The Multi-color Tub Light is activated by pressing
the light icon key on the combination electronic
keypad at any time.
Rainbow Mode:
The first press will put the light in a
“
Rainbow
”
mode, rotating through
each of the color variations.
Single Color Mode:
Subsequent press-and-release of the light key will illuminate a single
light color in the following order: White, Blue, Aqua, Green, Yellow,
Red, Magenta
Power off:
To turn off the Light press and hold the light key at any time.
May not be applicable to your specific package
Refer to your package diagrams for more information
32 of 38
