The walk-in bathtub can be installed and finished with tile or wall panel as shown in the image
above. Matching color silicone-based caulking must be applied to joints. The tile flange must be
installed to the connecting edge of the bathtub with 100% silicone before pushing the walk-in tub
against the wall into the place.
NOTE:
Any alterations or installed additions are the responsibility of the installer. Ella Accessible
Bathrooms is not responsible for any damage to the unit or for water damage, which could occur
due to improper installation.
www.ellasbubbles.com
Finishing the Installation of the Walk-In
Bathtub to the Wall
18 of 27