It is the responsibility of the installer or owner to provide access for service required, per
code.
is not responsible for any costs related to obtaining access for repair. The owner shall
assume responsibility for such costs, and if appropriate, must seek recovery from the installer.
Do not insulate around the tub equipment. The tub, frame and all parts have been
engineered to provide the proper ventilation. Any obstructions may cause the pumps or
other electrical components to overheat.
Door Seal
Please keep in mind that the door has been closed for an extended period of time
throughout shipping and the bathtub has been stored in various temperatures. It is possible
for the silicone seal to stick to the frame when stored for extended periods of time. When
the bathtub is received, the door seal should be checked for deformations from shipping
and re-formed and adjusted where necessary. To restore the door seal, the seal must be
released and allowed to relax with the door open. This is done by squeezing the seal with
your finger tips and pulling it away from the door frame to regain its flexibility and original
form. It is recommended that the door be kept open when not in use to increase the
lifetime
of the door seal and maintain its flexibility.
Service Access
and Ventilation
S-
Series
Walk In Bathtub
