Version 2.0.3
February 13, 2006
Specifications
Enclosure
•
Width: 150 mm (5.91 inches)
•
Length: 120 mm (4.72 inches)
•
Height: 65 mm (2.56 inches)
•
Weight: 750 g (1.7 pounds)
Analysis Computer connector
•
USB 2.0 high speed (480 Mbit/s)
Link Under Test connectors
•
USB 2.0 high speed (480 Mbit/s), full speed (12 Mbit/s) et low speed
(1.5 Mbit/s)
•
Automatic speed discovery of Device Under Test
Trigger connector
•
Type: BNC
•
Input: 5 V max, 1 Mohms
•
Output: 3.3 V, max 20 mA
•
Absolute maximum ratings: -0.5 V .. +6.5 V, 50 mA
Indicators
•
Power: lights up when the analyzer in powered on
•
Activity: lights up in green when packets are detected (in red when they are
recorded)
•
Trigger: lights up in green when a trigger is detected in input (in red when
detected in output)
Memory
•
32 MBytes of FIFO memory
•
Analyzed data is transmitted continuously
Bus analysis
•
Timestamp: 16.67 ns (60 MHz) precision
•
Low-level errors: detection of bit-stuffing, CRC5 and CRC16 errors
•
Bus states: detection and measurement of Reset, Suspend, Keep Alive and High
Speed Handshake states
Power Requirements
•
Powered by the USB bus of the Analysis computer
•
No external power supply needed
USB Explorer 200
User's manual
Page 13 of 17
