Settings
62
BA_Elmasolvex_VA_EN_Vers.05.2018
© Elma Schmidbauer GmbH
7.2.2
Create cleaning program from copy
On the display
Modify / Create Programs
(
Fig. 7.2.1.1
), select
Create new program
using / and confirm with .
The display
New program from copy
with the already existing
cleaning programs (
Fig. 7.2.2.1
) is shown.
Using / , select the cleaning program which should be
copied and modified (e.g.
Standard
).
Confirm the selection with .
Fig. 7.2.2.1 Display
new program from copy
After selection of the cleaning program to be copied, the
Program name
display (
Fig. 7.2.2.2
) is shown.
In the field for the program name, the original program name
with a number e.g.
_0
is initially specified. The name can be
changed individually as described in
Chapter 7.2.1
.
To save the program name and continue with setting the
program parameters, press .
Fig. 7.2.2.2 Display
Program Name
Selecting program to
be modified
Naming new program
