How to replace the heating
© Elma Schmidbauer GmbH
SM_Elmasonic_S_02.2018_EN
53
Illustration 13.1. Transducer tank removed, with horizontally mounted
heating element. Broken lines: cut the silicone fixation (A). Push the
heating element out of the support rails as indicated by the arrows.
Cut the silicone fixation (
A
) with a knife.
Push the heating element in direction (
B
) out of the supporting
rails.
Prepare the new heating element: The new heating element
can be pushed in more easily if the edges of the aluminum
profile have been rounded off with a file.
Insert the new heating element (
position C
) into the supporting
rails. Push it into the supporting rails, be careful not to jam the
heating element. Then secure against displacement with
silicone.
Illustration 13.2. Transducer tank unremoved, with horizontally
mounted heating element. Broken line: cut the silicone to remove.
Removed tank
S15H – S 300H
A
B
B
Tank unremoved
S15H – S 300H
B
C
A
B
C
A