Replace the handle
© Elma Schmidbauer GmbH
SM_Elmasonic_S_02.2018_EN
63
17
Replace the handle
The handles are fixed with 2 split pins.
1001070
1. Open the unit as described in section 6.
2. Press the 2 split pins with a suitable tool ( for example a
screwdriver and a hammer) downwards out of the handle.
Direction see illustration 1.
3. Remove the old handle outwards the housing.
Illustration 1. Remove the split pins
4. Place the new handle in correct installation position.
5. Fix the handle with the 2 new spilt pins:
push the 2 new split pins, e.g. with a long tweezers, into the
handle.
6. Fix the 2 new split pins and the handle, e.g. with silicone.
Elma order no.
How to proceed