Maintenance
16
BA/X-tra/0908
© Elma GmbH & Co KG
7
Maintenance
7.1
Maintenance / Care
Pull the mains plug before carrying out any maintenance works.
ATTENTION
The present Elmasonic S unit is maintenance-free.
Check the housing and the mains cable for damage regularly in
order to prevent electrical accidents.
Electrical security
In order to prolong the service life of the transducer tank,
remove the cleaning residues regularly, in particular metal
particles and rust film particles.
Care of transducer
tank
Lime deposits on the stainless-steel tank e.g. can be cleaned
gently with elma clean 40 or elma clean 115C (operate the unit
with conce water).
If the unit is used for medical purposes we recommend to
disinfect the transducer tank and the tank edge regularly
(standard surface disinfectants).
Check regularly the grid of the air fan at the bottom of the unit
(not existent in all units).
Grid of air fan
Remove dirt if necessary to allow sufficient ventilation inside the
unit.
Residues of cleaning media can be wiped away with a
household cleaner or decalcifier depending on the kind of
contamination. Do not put the unit under water!
Care of housing
7.2
Repair
Repair and maintenance works which require the unit to be
connected and opened must be carried out by authorized and
specialized personnel only.
Opening by
authorized
specialized
personnel only
Separate the unit from the mains before opening up the
housing. The manufacturer cannot be held responsible for any
damage caused by unauthorized repair works.
WARNING
In case of damage please contact the manufacturer or your
supplier.
