Ultrasonic cleaning factors
8
BA_ Elmasonic xtra ST 1900S_EN_Vers.04.2019
© Elma Schmidbauer GmbH
3.2
Ultrasonic cleaning process
1. Fill the ultrasonic tank with water and cleaning concentrate
(
Section 6.1
).
2. Heat up the cleaning liquid, if required for the intended
cleaning application (
Section 6.2
).
3. Degas the cleaning liquid – operation in
pulse
mode at
45 kHz (
Section 6.3
).
4. Select the cleaning frequency – 25kHz or 45 kHz depending
on the intended cleaning application (
Section 6.4
).
5. Activate the operating mode
pulse
- if required for the
intended cleaning application (
Section 6.5
).
6. Switch on the ultrasound (manual or automatic start-up)
(
Section 7.1
and
Section 7.2
).
7. Put the cleaning items into the cleaning bath (
Section 7.4
).
8. Rinse if necessary (
Section 7.5
).
9. Dry if necessary (
Section 7.5
).