Maintenance
© Elma Schmidbauer GmbH
BA_ Elmasonic xtra ST 1900S_EN_Vers.04.2019
27
8.3
List of recommended cleaning media
Elma has a large range of suitable cleaning products on offer
developed by chemical engineers in the Elma laboratory.
Please contact your supplier to find the most suitable cleaning
chemical for your application.
Product informations and safety data sheets are available from
the manufacturer (www.elma-
ultrasonic.com/produkte/reinigungsmittel).
9
Maintenance
9.1
Maintenance and care
Pull the mains plug before carrying out any maintenance
works!
The present ultrasonic unit is maintenance-free.
Check the casing and the mains cable for damage regularly in
order to prevent electrical accidents.
Check the ultrasonic tank for leaks:
Immediately separate the unit from the mains in case of visible
leaks in the ultrasonic tank, e.g.
•
if there are any inexplicable stains or residues of cleaning
liquid under or next to the unit
•
if there is a high loss of liquid from the filled unheated tank
which is not due to vaporization
Inform your supplier or the manufacturer of the unit on the leak
and the cleaning medium used. Return the unit to the
manufacturer or to your supplier for inspection and repair.
Check the ultrasonic tank regularly for residues, in particular on
the tank floor. Remove any residues.
Check regularly at the bottom of the unit.
If necessary remove any contaminations, possibly by means of
a vacuum cleaner to guarantee sufficient ventilation inside the
unit.
Any residues of cleaning liquids can be removed depending on
the type of cleaning medium used. Wipe off the cleaning liquid
with a cloth.
ATTENTION
Electrical security
Check the ultrasonic
tank for leaks
Maintenance of the
ultrasonic tank
Ventilation slots at
the bottom of the unit
Maintenance of the
casing