\\Elmacron-server\Gemensam\Instruktioner\Instruktioner i W ord\1005RE\Engelska\1005RE-ORP%E.doc
- 2 -
-
Senast utskrivet 2007-10-11
11:16
1. INTRODUCTION
1.1 COMMON INTRODUCTION
1005RE is a new CE-approved series of controllers from Elmacron AB. In the series, there are
instruments for pH, Redox% and Redox mV measurement/ control.
1005RE is easy to program, calibrate and use.
The layout is clear; a large display with four LED-segments, diode indication for the menu and four
large function keys. All parameters are entered/changed with the function keys.
When connecting an electrode to 1005RE-ORP% the display shows the actual measured value in the
solution measured.
1005RE-ORP% is provided with an isolated output 0/4 - 20 mA, proportional to the measured value,
for connection to, for example, a computer, printer or other recording equipment. When measuring is
interrupted, the output stays frozen at the latest measured value.
1005RE has four relay outputs which can be set high/high, low/low, high/low and low/high. As
regulation form, you can make a choice between On/Off and proportional regulation.
Under the proportional regulation You have to choose between pulse and frequency related
regulation. The alarm delay can be set between 0 and 9999 seconds. The function "shutdown at
alarm" can be chosen on or off.
1.2 PARTS & ACCESSORY
1005RE is delivered without connection cables and electrodes.
Article Function
Code
number
Power supply cord, standard
Power supply
20-R037-000
Low noise coax cable with BNC-connection
( xx* = 01, 02, 03, 05, 07 or 10 meter )
Connection of electrode/probe
60-T810-0xx*
