background image

  

 

 

 

Safety features 

 

Service personnel are prohibited to: 

  Plug the device in to a power outlet that differs from the specified configuration. 

  Use the device with damaged power cord, water tank, control block. 

  Move the device during work. 

ATTENTION! Studied Samples may contain pathological material, including pathogens of 
serious diseases. 

 

Disinfection and cleaning 

 

Before you start disinfection or cleaning make sure the power cord is unplugged. It is 

recommended to perform cleaning with water and universal washing liquids. Afterwards the 
machine should be carefully dried. Do not let the water get inside the control block. 

 

 

Transportation and storage 

 

To ensure safety during the transportation, transported equipment should be packed in the 

original manufacturers packaging or similar packaging substitute. 
Equipment can be transported by any kind of closed transport make sure that equipment is 
tightly fixed, and transportation runs accordingly to regulations applied to this way of transport. 
Equipment should be stored in original manufacturers packaging in dry room with humidity not 
more than 80% and temperature range from +10°C up to +40°C. It is not recommended to store 
the equipment more than 36 month. 

 

 

Warranty statements 

 

  Warranty applies to 24-month period from the date of purchasing. 

  Malfunctions arisen by the fault of manufacturer during warranty period, are removed free of 

charge. 

  Warranty is not valid in the following cases: 

- If the serial number label of the manufacturer is damaged. 
- If damages appear as a result of the incorrect operation, transportation or storage. 

  These documents are necessary if applying for warranty repair: 

- User manual with serial number of the machine. 
- Officially signed report, describing the reasons and conditions of equipment malfunction. 

  Warranty repair could be performed only if the equipment is delivered in the original 

manufacturers packaging or equally safe packaging. Therefore, please keep the 
packaging after unpacking the device. 

  If the above warranty requirements are disturbed, repair charges are applied to the 

consumer. 

  For all further questions concerning exploitation and maintenance please contact 

manufacturer or product vendor. 

Summary of Contents for TW-2.03










Reviews: