7
■
Follow the guidelines below to prevent the product from dropping or overturning.
• Use the product on a stable base, desk, or table. Do not place the product on an
unstable base or slanted location.
• Place or wire the product to prevent the AC adapter cord or video cable from pulling.
■
Luminescent spot and black spot
There may be some pixels that do not properly operate due to the use of image pick-up
device made-up of many pixels. Though luminescent or black spots may be found on the
screen, it is a phenomenon peculiar to the image pick-up device and is not a malfunction.
■
There may be some flickering on the screen when shooting a pattern image with gradual
changes in brightness. It is a phenomenon peculiar to the image pick-up device and is not
a malfunction.
This product is not designed to display such kind of images.
■
There may be some image distortion for a moment when the output resolution of the
connected device is changed while the image is projected. This is because the product
automatically adjusts the projection settings according to the input signal. It is not a
malfunction.
■
Lifetime of the parts
Using this product in high temperature or in locations where there are a lot of dusts or
smoke or using this product continuously for a long period of time for business purpose
may deteriorate the product performance or quality even less than a year of usage, due to
the lifetime of its parts. To purchase replacement parts or repair, contact the dealer from
whom you purchased this product or branch/office near your location for chargeable
repair.
Notes on the use of Wireless LAN（ＷｉＦｉ）
■
This product uses 2.4GHz radio waves. The wireless device in this product has been certified
under the Radio Law.
Do not use this product under the following conditions:
-Near industrial, scientific, and medical devices, such as a pacemaker
-Near in-plant radio station for mobile equipment identifier (license required and being used in
factory line; etc.)
-Near low power wireless base station (license not required)
■
Depending on the using environment the wireless communication may be adversely affected.
Especially the wireless communication is not available when there are reinforcing steel, metal
and/or concrete between the product and the equipment.
■
The frequency bandwidth permitted to be used varies depending on the radio wave
regulations in each country. Using this product outside the country may be illegal.
