145
145
OPERA
T
ION OF THIS
CAMERA
ENGLISH
1.
Set the main unit.
Fold only the lamp column of the main unit (Fig. [A]), connect the projector or
PC monitor to the main unit, and turn ON the power supply to the Camera.
2.
Set the slide shooting adapter.
Place the supplied slide shooting adapter over the lamp head, and adjust, while
watching the screen, its position so that the opening of the slide shooting adapter
can be positioned in the center of the screen (Fig. [B]).
3.
Adjust the size.
Set the slide or film on the slide shooting adapter (Fig. [C]), and adjust the
slide size so that it can fit the screen size by using the zoom dial on the
camera head or the zoom buttons [
][
] on the wireless remote control.
4.
Adjust the focus.
Press the [AF] button on the camera head or wireless remote control to bring the camera into focus.
5.
Adjust the brightness.
If the screen is too bright or too dark, adjust the brightness by selecting
[BRIGHTNESS SETTING] from the OSD Setting menu or pressing the
BRIGHTNESS [
] or [
] button on the wireless remote control.
Presentation Using Films
Note:
• According to the film to be used, switch the display settings by selecting [
POSI/NEGA]
→
[POSI]/[NEGA]
from the OSD Setting menu or pressing the [POSI/NEGA] button on the wireless remote control.
• If the screen looks still dark after adjusting the screen brightness, put a white sheet or the like on
the stage and then set the slide shooting adapter thereon, and the brightness will be improved.
[A]
[C]
[B]
Slide shooting
adapter
Film
Pass the film under the tabs.
Slide
書画カメラ P30S.book 145 ページ ２００８年１月２４日 木曜日 午後６時３８分
Summary of Contents for Document Camera P30S
Page 2: ...81 ...
