16
6. OPERATION PROCEDURES
(1) Turn ON the power switch.
Note: Before turning ON the power switch, connection to
the monitor should have been completed.
Note: When the power switch is turned ON, the lighting
unit lights up.
Note: If the power switch is turned ON immediately after
being turned OFF, the Presenter may not operate.
For restarting, turn ON the power switch several
seconds after turning OFF.
(2) Place the object on the stage. Adjust the image size
according to the object size using the zoom buttons
(
[TELE]
/
[WIDE]
) on the front panel or the zoom buttons
(
[TELE]
/
[WIDE]
) on the wireless remote control, while
watching the image on the TV monitor.
(3) Press the auto focus button
[AUTO FOCUS]
on the front
panel or the auto focus button
[AF]
on the wireless remote
control.
Note: The auto focus function works up to a height of
approx. 15cm (5.9 in.) above the stage surface
(when the close-up lens is attached).
Front panel
Wireless remote control
Simple steps for presenting printed material
Front panel
Wireless remote control
