18
7. VARIOUS FUNCTIONS
Lighting
The upper lighting unit for presenting material such as
printed matter and 3-D objects, and the baselight for
presenting transparent material, such as slide, and negative
films, are built in to the Presenter.
When the lamp button
[LAMP]
(
[UPPER]
/
[BASE]
) on
the front panel or the lamp button
[LAMP]
on the wireless
remote control is pressed, the fluorescent lamp lights up in
1 to 3 seconds.
Every time the lamp button
[LAMP]
on the wireless
remote control is pressed, lighting is switched in a cycle of
the lighting unit lights up
the base light lights
up
the base light goes out
.
The lighting unit lights up when the power supply is turned
ON.
To turn OFF the lamp, press the button for the respective
lamp.
Note: It is impossible to have the upper lighting unit and
the baselight lit up together.
Note: When the lightness of the material surface is not
sufficiently high or a 3-D object is presented, a
sharp image with good color rendering can be
obtained with the upper lighting unit on.
Front panel
Wireless remote control
