23
White balance
The camera of the Presenter automatically adjusts the
shooting color balance (AUTO mode). However,
depending on the color arrangement of document or the
like, this color balance may be lost. In such case, shoot the
stage surface, and press the white balance button
[WHITE
BALANCE]
on the operation panel. Then, the indicator
lamp blinks and then lights up, the mode is switched to the
ONE-PUSH mode, and the white balance is fixed.
When the white balance button
[WHITE BALANCE]
is
pressed again, the indicator lamp goes out, and the mode
returns to the AUTO mode.
AUTO................... To set the white balance in the auto
follow mode (initial setting).
ONE-PUSH ......... To set the push-set white balance.
By pressing the button
[WHITE
BALANCE]
, the white balance for
the then color temperature is fixed.
Note: The automatically followed color temperature
ranges from approx. 3000k to 8000k.
Operation panel
Iris
To adjust the Auto iris level of the lens.
Press the iris button
[OPEN]
on the operation panel or the
iris open button
[IRIS OPEN]
on the wireless remote
control, and the iris will open.
Press the iris button
[CLOSE]
on the operation panel or
the iris close button
[IRIS CLOSE]
on the wireless remote
control, and the iris will close.
Press the iris normal button
[IRIS NORMAL]
on the
wireless remote control, and the initial setting will be
resumed.
Note: If the screen looks dark, press the iris button
[
IRIS OPEN
] on the wireless remote control to
adjust the brightness of the screen.
Operation panel
Wireless remote control
