24
Focus
Auto Focus
Press the auto focus button
[AUTO FOCUS]
on the front
panel or the auto focus button
[AF]
on the wireless remote
control, and the auto-focus will be activated.
While the auto-focus is in operation, the indicator lamp on
the front panel blinks until the object is brought into focus.
Front panel
Wireless remote control
Front panel
Wireless remote control
The Presenter features a one-push auto focus function.
Once focusing is completed, the auto focus function is
released, and the focused position maintains unchanged
(FOCUSFREE).
To obtain sharper image, zoom in on the object by
pressing the zoom button
[TELE]
on the front panel or
wireless remote control and press the auto-focus botton.
However, the objects listed below may not be brought into
focus in the auto focus mode. In these cases, use the
manual focus mode.
·
Objects bearing little contrast
·
Objects with fine repeated patterns, such as lateral
stripes and cross stripes
·
Objects glittering or reflecting strong light
·
Objects with bright background, or excessive contrast
·
Objects in a dark picture plane
·
Objects located near and far away at the same time
·
Objects in motion
Operation panel
Wireless remote control
If the focus button
[NEAR]
or
[FAR]
on the front panel or
the focus button
[FOCUS NEAR]
or
[FOCUS FAR]
on
the wireless remote control is pressed during the auto
focus, the auto focus will be released.
Note: The auto focus functions up to approx. 15cm (5.9
in.) above the stage surface (with the close-up
lens attached).
