33
9. RS-232C SPECIFICATIONS
The Presenter can be controlled by a PC connected to the Presenter through the RS-232C terminal
[RS-232C].
Setting up
(1) Open the OSD menu, select the <PC> setting by opening <MENU>
<OPTION>
<REMOTE> in this order,
and close the Menu screen.
Note:
Upon selection, the mouse is no longer operable.
(2) Connect the Presenter to a PC with an RS-232C connection cable.
Note: When using an RS-232C cable available in the market, make sure of the connection shown the next page.
Note: To protect the Presenter and the PC, be sure to turn OFF all the power switches of all equipment before
connecting.
(3) Start the PC, and set the communication mode of the RS-232C to the communication mode of the Presenter.
Note: For the information how to set the communication mode of the RS-232C, refer to the instruction manual of the
PC.
(4) Start the PC program to operate the Presenter.
(5) Control through the RS-232C will start.
Note: For communication control, be sure to take the above steps for setting.
