8
BASIC
OPERA
TIONS
④ Connecting to a device with an analog RGB input port
Connect a commercially available RGB cable to the [ ] port on the rear
panel.
⑤ Connecting to a device with an analog RGB output port
Connect a commercially available RGB cable to the [ ] port on the rear
panel.
■ Specifications of the
［ ］
port
Signal allocation
10
9
8
7
6
5 4 3 2 1
15 14 13
DSUB 15P shrink terminal (Female)
12 11
Video signal
Horizontal synchronized signal
Vertical synchronized signal
Analog
0.7V (p-p) 75
Ω
terminated
TTL level
(Positive/negative polarity)
TTL level
(Positive/negative polarity)
Pin assignment
Pin No.
Name
Pin No.
Name
Pin No.
Name
1
Video signal (Red)
6
Video signal (Red)
11
GND
2
Video signal (Green)
7
Video signal (Green)
12
N.C
3
Video signal (Blue)
8
Video signal (Blue)
13
Horizontal
synchronizing signal
4
N.C
9
N.C
14
Vertical
synchronizing signal
5
GND
10
GND
15
N.C
⑥ Connecting to a computer with a USB cable
Connect a commercially available USB cable to the ［ ］ port on the rear
panel.
• If the displayed image is off-center, adjustment of the horizontal and vertical position should be
made from the connected device.
• In some cases, vertical stripes may appear on the display device such as a projector and a monitor.
This can be reduced by adjusting the “clock phase” function of the connected device.
• When using a computer with an external output mode, set the computer to the external output
mode after pressing the [ ] button on the operating panel.
• We recommend using a compliant USB cable.
• If you plug into a USB cable with the power on, the computer may not recognize the product.
• Depending on the computer's USB environment or the peripheral equipment, image transfer may
be disrupted.
N o t e
Summary of Contents for L-12W
Page 9: ...viii...
