11
➌
PREPARATION AND CONNECTION
◆
SETTING UP
STEP1
Raise the camera head as indicated by an arrow while holding the base.
STEP2
Raise the upper arm as indicated by an arrow.
STEP3
Set the camera head horizontally.
STEP4
Rotate the camera head to adjust the shooting angle.
CAUTION
STEP1
120°
180°
Arm (lower)
Base
STEP2
STEP3
STEP4
Camera
Arm (upper)
Adjustment screw
CAUTION
・
Be careful not to pinch your fingers when moving the arm.
・
Do not hold the arm or camera head when carrying the product.
・
Be careful not to give an impact to the camera head.
・
This product uses components prone to static electricity. To avoid malfunction due to static
electricity, hold the end of the camera head when moving the camera head. Do not touch
the rotating part.
Camera head
・
Do not move or rotate the parts of the product beyond the
movable angle. Otherwise the product may be damaged.
・
When moving the arm (lower), loosen the adjustment
screw. After moving the arm (lower) to the shooting
position, tighten the adjustment screw.
・
You cannot fix the arm completely by tightening the
adjustment screw. Be sure not to tighten the screw too
much.
・
There is a stopper on the arm (lower).
The stopper prevents the arm from moving over 110°.
Be sure not to apply excessive strength on the arm.
Loosen
Tighten
Arm (lower)
Adjustment screw
Movable range
0°〜110°
