12
◆
CONNECTING TO A COMPUTER
The product is compliant to UVC (USB video class) standard. You can transfer the image via
USB by connecting the product to a computer using the USB cable.
1
．
Connect the type B connector of the supplied USB2.0 cable to [
] connector in the
side of the product.
2
．
Connect the type A connector of the USB2.0 cable to the USB port of your running
computer.
3
．
Launch the viewer on the connected computer.
※
The product will not turn on until the viewer is launched.
About the viewer software
The image can be viewed by using the Elmo "Image Mate+C" or a free viewer software.
Go to the following website when using the "Image Mate +C".
⇒
https://imagemate-c.com/
※
For details about the “Image Mate +C”, visit the above website.
CAUTION
・
If your computer does not meet the recommended requirements or depending on the
performance of your computer, the recording frame rate may be decreased.
・
Do not connect/disconnect the USB cable while operating the product . It may cause
malfunction.
・
We recommend using the standard USB2.0 cable.
Type A
USB cable
⇒To the USB port
USB cable
⇒To type B port
