14
➍
USING THE PRODUCT
◆
ADJUSTING THE FOCUS
Press the AF button to automatically focus on the subject.
◆
TURNING THE LED LIGHTING ON/OFF
Press the LED lighting button to turn on the LED lighting.
Press this button again to turn off the LED lighting.
◆
SECURING THE PRODUCT
①
Using the Desk Clamp (sold separately)
By using the Desk Clamp, you can secure the product to
the installation surface.
For details, refer to the following website.
https://www.elmousa.com
https://www.elmoeurope.com
②
Using through holes
By using through holes (
φ
4.5) of the product,
you can secure the product to the installation
surface such as a desk.
Use a screw with nominal diameter 4. (screw head
diameter: 6mm – 8mm).
Select a screw that is long enough to fix the product
to the installation surface.
※
The distance from the screw attachment to the bottom
of the product is 14mm.
※
Screws are not included in the product.
③
Using a tripod screw
By using a tripod screw hole (1/4-20UNC) in the
bottom of the product, you can secure the product
to the installation surface.
※
Screws are not included in the product.
CAUTION
• To take shots of people, turn off the LED lighting.
• Make sure that the light from the LED lighting does not shine directly into your eyes.
• This product is equipped with a high-brightness LED. You can safely use it to light up
the object. The brightness will gradually decrease with long-term use. This is not a
malfunction but a characteristic of the LED.
• Do not touch the LED lighting while it is on as it may become very hot.
through holes
tripod screw holes
Desk Clamp
