- 9 -
Point the infrared emitter of the wireless remote controller to the infrared sensor located on
the front of the Camera main unit, and press the button of the intended operation.
For the receivable range, refer to the below figures.
●
Receivable range
Distance : Within approx. 7m from the infrared sensor front
Angle
: Within approx. 60° right and left, approx. 10° above
and approx 30° below from the infrared sensor front
Note
: The infrared sensors may receive the infrared rays only within a
narrower receivable range or may not receive them at all depending
on the ambient environment, such as being placed under the sunlight
or near an inverter fluorescent lamp. In such case, relocate the
installation place of the receiving side or block off the sunlight.
7m
60
°
60
°
Side view
Bottom view
7m
10°
30°
●
Precaution for the battery
Remove the battery case cover by pressing downward on the [
] mark part in the
direction as indicated by the arrow.
Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated
there.
Note:
Install the batteries with the proper
to
and
to
polarity.
Note:
For dry cells, be sure to use the size AAA.
Note:
Change the batteries at least once a year or when even nesessary.
2. WIRELESS REMOTE CONTROLLER
