- 99 -
●
Motion Detection Setup (for ELMO 1Channel Viewer only)
Name
Function
Factory settings
Use Motion
Used to set whether to use motion detection.
No
Detection
Motion
Set a period for which motion detection is prevented
3
Detection
after the Camera performs PAN/TILT/ZOOM when the
Ignore Time motion detection function is enabled and a detection
After PTZ
area is set.
* This function prevents the operation of the automatic
iris function from being detected as a motion after
PAN/TILT/ZOOM.
Sensitivity
Set the sensitivity of motion detection.
High
High – (adjustable using the scroll bar) – Low
Set/Clear
Used to select Set or Clear.
Set
Set
: Sets the area dragged on the screen as a
detection area.
Clear
: Sets the area dragged on the screen as a non-
detection area.
Detection
Detect
: Hatching display enabled
(None)
Area
Not Detect
: Hatching display disabled
Reset
Sets all areas on the screen as non-detection areas.
(None)
Select All
Sets all areas on the screen as detection areas.
(None)
Reverse
Reverses set detection and non-detection areas.
(None)
Apply
Applies area settings.
(None)
●
Select Language (for ELMO 1Channel Viewer only)
Name
Function
Factory settings
Select Japanese/English
None
Program
Language
System
Used to set the current date and time of the Camera.
(none)
Time
