- 102 -
Ref.
Symptom
Checking Point
Page
The network
Recheck the Camera and the network configuration of
P. 33
function does
the PC connected to it, and check them for the
not work.
phenomena described below.
Recheck the restraints on the Camera, including the
number of connections, and the settings as well.
The operation
• The network operates only in the environment shown P. 33
of the network
below when it is connected to the Web:
is unstable.
1. The OS is Microsoft Windows 2000 or XP.
2. JRE 1.5.0 or a later version is installed.
3. Java (Sun) is enabled.
“ELMO 1Channel Viewer” operates only in the
environment shown below.
1. The OS is Microsoft Windows 2000 or XP.
2. DirectX 9.0C or a later version is installed.
The LAN cable
The LAN connector (RJ45) is provided in the back of
P. 7
cannot be
the Camera.
connected.
• The power to the Camera or a device connected to it
is not turned ON.
Confirm that the cable is connected securely, and
turn ON the power.
• The network address set on the Camera and that of
the network to which the Camera is connected do not
match.
If the initial setting for the Camera is not changed
and the network address is 192.168.1.*, the link
indicator lamp lights only when a computer whose
set IP address is 192.168.1.* (except 192.168.1.10)
is connected to it using the LAN cable.
• The LAN cable is broken.
Check if continuity appears across cable connector
terminals.
• A wrong cable is used.
P. 34,
Basically, use a “LAN cross cable (supplied)” when 35
a PC is connected to the Camera, or a “straight
cable”when a hub or router is used.
Check the specifications of the device to be con-
nected.
The LAN
connector link
indicator lamp
does not light.
