- 16 -
(1) Turning OFF the Camera
• When the Camera is ready for operation
through the wireless remote controller and
POWER
button is pressed, the Camera
power is turned OFF. (However, even after
the Camera is turned OFF, power is still being
supplied to the Camera as power supply to the
Camera is not OFF.)
• The image disappears, and the LED on the
Camera lights up in red. Now, no buttons on
the wireless remote controller are functional
other than
POWER
button and
ID
button.
• When the OFF TIME function is ON (refer to
the settings in the OSD (On-Screen Display)
Menu screen on P.22), Camera power is
turned OFF automatically upon the lapse of
the set time.
3
1
1
(2) Turning ON the Camera
• When the Camera is OFF and
POWER
button is pressed, the Camera power is
turned ON.
• The image appears, and the LED on the Camera goes out. Now, the Camera is ready
for operation of all functions through the wireless remote controller.
• If the ID number is changed, the Camera power may not be turned ON. In such case,
redo the ID number setting, and press
POWER
button.
1
1
3
1
[2] Turning ON/OFF of the Camera power
[1] Power ON/OFF
The Camera has no POWER switch. The power supply to the Camera is turned ON
when the power cord and AC adapter are connected to the outlet and the Camera.
Once the Camera is turned ON, it automatically starts initial setting.
4. OPERATION PROCEDURES
