- 27 -
[ 6 ] PAN TILT
Name
Factory Settings
Function
To select the motor speed setting [AUTO/MANUAL] for
the PAN-TILT operation.
When [AUTO] is selected, the operation speed varies
automatically according to the zoom position.
When [MANUAL] is selected, the operation speed can be
selected freely.
To select the operation speed [0 – 7] (0: Fastest) when
[MOTOR SPEED] is set to [MANUAL].
1
MOTOR SPEED
SPEED
AUTO
To change the direction of the PAN operation left and
right.
2
L/R DIRECTION
OFF
When the Clear Dome Cover (PTC40CL) or the Smoke
Dome Cover (PTC40SM), both available on option, is
attached, set this function to [ON]. According to the dome
cover, this function limits the TILT operation range.
(When the dome cover is not attached, set this function
to [OFF].)
3
DOME COVER
OFF
When this function is set to [ON], the image during the
movement between the preset positions becomes static
(the image before the movement). In this mode,
movement is enabled between the preset positions
(including the home position), but the PAN-TILT-ZOOM
operation is disabled. This function is useful to mask the
images other than the home position image and the
preset position images. (However, only when the
PRESET button is pressed, the image cannot be static.)
(Set this function to [ON/OFF].)
4
PRESET STILL
OFF
0
5
