- 29 -
7. Alarm
Alarms are caused by “alarm 1,” “alarm 2,” and “motion detection.”
You can set an alarm action for each cause. “Preset,” “With/Without alarm,” “Send e-
mail/Send FTP/Both/None” are available.
For alarm input 1, "lock mode," which disables other operations during input, can be set.
(See page 28.)
Note:
Another set alarm action takes place. caused by alarm input 1 or 2
takes place after moving to corresponding preset number “1” or “2.”
Note:
Since a preset action does not take place when a motion is detected,
another set alarm action takes place.
Note:
An alarm remains output from the alarm output terminal for ten
seconds. The alarm output period is fixed.
Specifications of the alarm output terminal: Open collector output,
maximum rating: DC12 V, 30 mA
28
51,76
52,77
51,52,
76
77
