- 42 -
e
Save Preset ......................... Registers the current direction of the Camera head, the
zoom position, the state of the focus, brightness level, and
the preset number designated in the Preset combo box .
r
Release Control ................... Registers the state of the focus and brightness at the preset
number designated in the Preset combo box when the
control policy is released on the Camera Control Setup
screen (page 57).
t
Speaker................................ Set whether to output sound from the client when sound is
input through a microphone or another device connected.
y
External GPIO..................... Turns ON or OFF a external GPIO terminal.
u
Zoom ................................... Zooms in or out the object.
Wide: The Wide side. The object is displayed small.
Tele: The Tele side. The object is displayed large.
i
Iris ....................................... Adjusts the iris. The auto iris (the automatic adjustment
function to keep brightness at the same level even if the
state of the object changes) is valid at all times. Use the
“Open” and “Close” buttons to “increase” or “decrease”
brightness. By clicking on the “Normal” button, brightness
will be adjusted to the normal level.
o
Focus ................................... For manual focal adjustment, use the “Near” and “Far”
buttons. For automatic focal adjustment, clck on the
“Auto” button.
!0
Preset................................... Select in the preset combo box a preset you want to
display the image to (setting range: Home, Preset 1-16.).
By clicking on the “Goto Preset” button, the registered
preset appears.
By clicking on the “Save Preset” button, the current state
will be registered at the preset number selected above.
