- 53 -
• IP........................................... Designate the IP address of the server to which the FTP
will be transmitted.
• Port........................................ Designate the port number of the FTP server to which the
FTP will be transmitted. It is not generally necessary to
change the setting.
• User ID ................................. Designate an account name for connection to the server to
which the FTP will be transmitted.
• User PW................................ Designate a password for the account name shown above.
• Directory ............................... Designate a directory for saving an image file, or a
directory with a write authority for the designated account
name.
• Passive Mode ........................ Designate whether to use passive mode or active mode for
transmitted the FTP. Use passive mode when there are
restrictions on the ports because of a firewall, etc.
•Time Store ............................. Set whether to regularly transmit and save images in the
FTP server.
• Time Store login each send .. Set whether to connect to the FTP server each time images
are transmitted or not (always connected).
• Time Store dwell time .......... Set the interval at which images will be saved when Time
Store is valid (30 to 180 seconds).
• Time Store resolution ........... Designate the size of images to be saved.
Half-D1: 704
×
240
SIF: 352
×
240
QQVGA: 160
×
120
• Time Store filename ............. Designate a file name for the file to be saved. A file name
consists of the “entered file name” and “time.” The
extension “.jpg” will be added automatically to each file
name. If a file with the same name already exists in the
directory for saving, the data of the older file will be
overwritten. Designate a different file name.
Note
: Two-byte characters, including Japanese characters, are not
available for a file name to be saved. Use one-byte alphanumerical
characters.
