- 56 -
(14) IP filtering Setup
Make settings relating to the IP filter.
Note:
Making the settings described here may prevent connection to the
Camera. Perform the setting operation with extreme care.
• IP Filter ................................. Select whether to use the IP filter function.
• Accept all .............................. Accepts any client connected to the Camera, except
connections from the IP addresses shown in Exception
List. (Only connections from the IP addresses contained in
the client list will be rejected.)
• Reject all ...............................Rejects all clients attempting to connect to the Camera. It
can be connected from the IP addresses shown in
Exception List. (Only connections from the IP addresses in
Exception List will be permitted.)
• Adding an address
You can add addresses between the start and end addresses to the list.
Enter an address at each of “Start IP” and “End IP,” and click on the [Add] button.
Note:
Up to 100 addresses can be registered.
