- 61 -
OFF
AREA
4
ATW
±
0
Name
Function
To set the backlight compensation function to [ON/OFF].
When there is an intensive light in the background, this
function prevents the object from becoming dark.
BLC
To select the Backlight Compensation Setting mode
[AREA/HIST].
BLC MODE
AREA
About the Backlight Compensation Setting mode
To select the area [0 – 4] on the image where the
backlight compensation function works when [AREA] is
selected.
AREA
To select the detail compensation level [-5 10]
AP GAIN
To select the White Balance Setting mode [ATW, AWC,
INDOOR, OUTDOOR, FL-LIGHT, MWB].
WB
AREA0
AREA4 AREA2
AREA3
AREA1
To select the image area of the object that needs an
appropriate brightness and weighing according to the
selected area.
HIST
To make the dark (blackened) part of the image visible
regardless of the area.
To adjust the white balance by way of continuous,
automatic following.
(When the image is in a single color all over, the white
balance may not be ajusted correctly.)
About the White Balance Setting mode
ATW
To adjust the white balance by one-push of button.When
[AWC] is selected and TRIGGER is ON, the white
balance is adjusted automatically in the then screen
status.
(This adjustment ends in seconds, and the adjusted
value is fixed.)
AWC
Factory Settings
