- 63 -
(19) Camera Settings (Misc. Settings)
Name
Function
To set the preset position [PRESET1 – 16] for movement
in case of input in the ALARM IN terminal <1>
ALARM IN1
ALRAM
LOCK
To set the preset position [PRESET1 – 16] for movement
in case of input in the ALARM IN terminal <2>.
ALARM IN2
When this function is set to [ON], as long as the input is in
the ALARM IN terminal <1>, other operations are
disabled. (Set this function to [ON/OFF].)
To select the image reverse angle [OFF, 100˚, 110˚, 120˚,
130˚, 140˚] (When the image should not be reserved, set
this function to [OFF].)
FLIP ANGLE
When this function is set to [ON], the image during the
movement between the preset positions becomes static
(the image before the movement). In this mode,
movement is enabled between the preset positions
(including the home position), but the PAN-TILT-ZOOM
operation is disabled. This function is useful to mask the
images other than the home position image and the
preset position images. (However, only when the PRESET
button is pressed, the image cannot be static.)
PRESET STILL
To set the time of automatic return to the home position
[OFF, 30s, 1min, 2min, 5min, 10min, 20min, 30min]
If it has passed over this set time with no operation after
the PAN-TILT-ZOOM operation, the Camera will return
automatically to the home position.
AUTO RETURN
Factory Settings
OFF
OFF
120
PRESET1
OFF
PRESET2
