- 69 -
• Focus
Focus Near/Focus Far ........ Used to adjust the focus manually.
Auto Focus ......................... Used to adjust the focus automatically.
• Iris
Open / Close.......................Adjusts the iris.
Normal ...............................Adjusts the brightness to the normal level.
*The auto iris (the automatic adjustment function to keep brightness at the same level
even if the state of the object changes) is valid at all times.
• Preset
Select a preset you want to display in Camera Position
(setting range: Home, Preset: 1 to 16).
Preset.................................. The registered preset is displayed.
Save.................................... Registers the current coordinates in the preset selected
above.
Reset................................... The PAN-TILT position saved by the Camera and the
actual position match each other.
• Preset Control ....................... This function is available when Time Slice Share is set for
Control Policy in camera control setup (page 87) and
opens the control of the Camera. It does not open control
when there is no client requesting it.
(4) Sound
You can set the receipt and transmission of Camera sound.
Note
: This function does not operate when 1 is set at Frame Rate on the
MPEG4 Setup screen.
• Receiving sound
Confirm that the speaker is connected properly to the host. When sound is input into the
Camera with the [Audio] – [Speaker] button in the Viewer menu or the
icon on the
icon bar clicked on, the speaker connected to the host outputs it. No
sound will be output from the speaker connected to the host if the
icon is not
clicked on.
