- 73 -
(8) Network Setup
Make settings relating to the network.
Note
: Before making network settings, consult the administrator of the
network you are going to use.
Note
: If this item is changed, the connection setting for the Camera may
need to be changed. In this case, make the proper connection
setting, and reconnect the Camera.
• Send Type ............................. Select a mode of distributing MPEG4 images.
UDP Unicast ...................... UDP Image data is distributed at the request of the host for
connection. Up to 3 addresses can be connected from
Viewer to the Camera.
Multicast ............................ UDP Image data is distributed, irrespective of whether the
Camera is connected or is not connected from the host,
resulting in a decrease in the load on the Camera and the
transmission line. Although any number of addresses can
be set, image data may not be distributed properly
depending on the network environment.
TCP Unicast ....................... TCP image data is distributed at the request of the host for
connection. Up to 3 addresses can be connected from
Viewer to the Camera.
• IP........................................... Set the IP address of the Camera.
• Broadcast .............................. Set the broadcast address of the Camera.
