- 79 -
(12) Motion Detection Setup
• Use Motion Detection........... Set whether to perform motion detection.
• Motion Detection Ignore Time After PTZ
............................. Set a time for which motion detection is prevented after
the Camera performs PAN/TILT/ZOOM (1 to 10 seconds).
• Sensitivity ............................. Set the sensitivity of motion detection.
• Area settings
When “Select” under “Tools” is checked, the area on the screen that is selected by drag
& drop will be set for a motion detection area. When “Delete” is checked, the set motion
detection area will be cancelled.
[Reset] button:
Cancels all areas.
[Select All] button: Sets all areas.
[Reverse] button:
Reverses a detection area to non-detection area and vice versa.
[Apply] button:
Applies the settings made.
